Description
The on-ear headset from DIGITUS® offers optimal voice quality. Noise reduction lowers the disruptive environmental noise on the microphone so you can concentrate fully on your call. With two jack connections, the headset can be used either as a headset or as normal earphones. With the optional headset adapter (AK-510301-002-S), the headset can also be used on a combination jack (4-pole). Thanks to the adjustable headband, it can easily be adjusted to any head size for optimal wearing comfort. The microphone can be rotated by 300° to configure the headset for use on the right or left side. The foam cushion on the earpiece ensures wearing comfort so you can even enjoy longer phone conferences. Ideal for use in offices or at home, for phone conferences or web seminars.
Technical details
- Connection type: 3.5 mm stereo jack
- Connection cable length: 195 cm
- Microphone noise reduction (one direction)
- Earpiece diameter: 30 mm
- Headphone sensitivity: 115 dB
- Headphone impedance: 32 Ohm
- Maximum power: 84 mW
- Headphone frequency: 20 - 20,000 Hz
- Microphone sensitivity: -42 dB
- Microphone impedance: ≤ 2.2 kOhm
- Microphone frequency: 50 - 15,000 Hz
Attributes
- Connection: 3,5mm (Stereo jack)
Package content
- 1 x On-Ear Office Headset with Noise Reduction, 2 x 3.5 mm Stereo
- 1 x QIG
Downloads and Certificates
Logistics
| Number (pcs) | Weight (kg) | Depth (cm) | Width (cm) | Height (cm) | cm³ | |
|---|---|---|---|---|---|---|
| Packaging Unit Carton | 40 | 9,00 | 32,00 | 38,00 | 58,00 | 70.528,00 |
| Packaging Unit Inside | 1 | 0,23 | 5,60 | 15,00 | 18,50 | 1.554,00 |
| Packaging Unit Single | 1 | 0,23 | 5,60 | 15,00 | 18,50 | 1.554,00 |
Safety notes
- Make sure that the cable is not subjected to too much strain or damaged, as this can lead to short circuits or other technical problems. Avoid pulling or twisting the cable.
- Do not expose the device to rain, moisture, vapors or liquids.
- Avoid using the device near sources of strong electromagnetic interference (such as cell phones or large appliances).
- Do not attempt to repair the unit or open the housing without authorization.
- Dust, moisture, vapors and strong cleaning agents or solvents can cause damage to the device.
- Clean the device with a dust-free cloth.
- For headsets:
- To avoid hearing damage, ensure that the volume is kept at a safe level. Very high volume levels can lead to permanent hearing loss.
- Do not wear the headset for too long at a time to avoid skin irritation or heat build-up.
- Protect your headset from moisture and rain. Many headsets are not waterproof and could be damaged by moisture.
- If you experience pain, pressure or dizziness after wearing the headset for a long time, please stop using it immediately and consult a doctor if necessary.
- Make sure that the headset is compatible with the device you are using and is connected correctly to avoid technical faults or damage.
- For microphones:
- Make sure that the microphone is correctly aligned and not positioned too close to your mouth or other sound sources to avoid unnecessary noise or clipping.
- Make sure that the volume of the microphone in an environment with loudspeakers is set so that there is no feedback. This can lead to unpleasant noises and damage the microphone or speakers.
EU responsible person
EU based economic operator ensuring the product complies with the required regulations.
ASSMANN Electronic GmbH
Auf dem Schüffel 3
Lüdenscheid
Germany
https://www.assmann.com
info@assmann.com